All laptop don't have that feature. When i... You could also try to reset the BIOS to defaults. –harrymc May 6 '14 at 18:48 1 I tried reseting Bios to defaults, no overclocking, tried both DVD and USB Conclusion: Either your Windows 7 DVD isn't 64-bit or your BIOS doesn't support UEFI well-enough. http://datkey.com/hard-drive/windows-10-doesn-39-t-recognize-hard-drive.html
But if it is not UEFI capable, you probably have to enable the CSM and then set to Legacy or UEFI, and maybe set a Secure Boot setting to Other OS. SATA mode is set to AHCI and I'm on Lenovo Y510P. Thanks for sharing the information with us Like Show 0 Likes(0) Actions 11. After the reboot, go to boot from your usb-drive.
Also, is it a must for you to install it with this CD? I've gone into the Advanced Boot Settings in Windows 10 where one can select a device to boot from. I have a bootable KillDisk CD and a Windows 7 CD, and a USB CD Drive, all of which I've used many times. Just seems bizarre that the laptop would come without the ability to boot from a disc or thumb drive.
Will not recognize Hard Drive as secondary if set up UEFI? This goes at least for USBs, and I would assume it does the same with CDs. Change UEFI Boot to CSM Boot. Uefi Boot Windows 10 Press SHIFT-F10 to bring up console.
You can check this by seeing if the file 'BOOTX64.EFI' via the path \EFI\BOOT\ is available on the CD. What Is Uefi Score 0 da4leo April 3, 2013 1:29:22 AM willi_01 said:Just wanted you to know that I am having the same issue with my c855d running windows 8, trying to do a Thanks. Why is the ratio maximum range speed/maximum endurance speed the same for any airplane?
However having burnt the ISO to DVD I have now found that my DVD drive does not show as a boot option in my BIOS. https://www.cnet.com/forums/discussions/dvd-optical-drive-not-showing-as-boot-option-in-bios/ When the Windows Charms appear, click the Settings ( ) charm, click Power, and then the Restart option. Uefi Doesn't See Hard Drive Linux dual boot error with windows 10 SolvedLenovo Ideapad 15D does not boot in to windows 10 after failed install of driver SolvedMy Toshiba Portage R930 won't boot. Can't Boot From Cd Windows 7 this allowed me to boot from my cd- let me know if it works for you Share EnderWiggin December 4, 2012 9:12:40 PM Best answer selected by EnderWiggin.
You should be able to find that option and select your optical drive as the first thing your computer detects, followed by your hard drive. http://datkey.com/hard-drive/sata-hard-drive-vs-ssd.html Please type your message and try again. by cw47mecom / September 15, 2015 12:40 PM PDT In reply to: Gigabyte made some thousand different boards. No bootable media is being detected. Hard Drive Not Showing Up In Bios
Flag Permalink This was helpful (0) Collapse - Gigabyte made some thousand different boards. When booting I can select F8, and have the option to select an HDD, USB or CD/DVD, and when I select either USB or CD/DVD, it seems to check the media I have read this is because of UEFI and it needs to be switched to Legacy Boot or something, but I don't get that option. check over here Super Thanks a lot finally I booted from DVD...
Otherwise, maybe this can be of any help? Boot From Efi File If your system cannot boot into Windows 8, shut down the computer completely, then press F2 while powering back on. To check that last part, go to disk management with the flash drive plugged in.
Score 0 Anonymous a b D Laptop January 20, 2013 10:32:49 AM how about the toshiba S955, in the system it does not have a csm feature to change and the solution SolvedI've had my windows upgraded to windows 10 on my Asus transformer book & now can't find my builtin webcam. It is provided for general information only and should not be relied upon as complete or accurate. this content However, installing Windows 7 64-bit on GPT can only be done in UEFI mode.
If that doesn't fix it, the installation made in one machine isn't going to work anywhere but in that machine. Seems they are greatly limiting what you can boot from, and I don't understand why. See the article How to Convert a GPT disk layout to a MS-DOS/MBR layout without data loss. Her disk won't be bootable until she turns off Secure Boot ...
Why don't we use meters for astronomical distances? Re: NUC DC53427HYE won't boot USB UEFI drive E-Creation Nov 4, 2014 10:47 AM (in response to sylvia_intel) I tried to switch of NUC without any component for at least 2 As to the flash drive, make sure you prepared it properly. Not the answer you're looking for?
Like Show 0 Likes(0) Actions 2. All I can comment on is what I've seen and hope it helps. No bootable media is being detected. I have changed the BIOS settings correctly.
The workaround is the USB stick you used but this is a sign the drive or machine is having an issue. To test, put a Windows 7 or Windows 8 DVD drive in the device BEFORE you boot and perhaps it will show up then. Computer Type Laptop System Manufacturer/Model Number Acer Aspire ES1-512-CSYW OS Windows 8.1 with Bing x64 CPU Intel Celeron N2840 @ 2.16GHz Motherboard Acer Aspire ES1-512 BIOS: Insyde Corps V1.07 Memory 4GB